ENiCrFeCo

2023-05-17 16:34:25 来源：钢铁之家阅读量：0

牌号	ENiCrFeCo
	W83002
对应标准	AWS A5.13/A5.13M-2010 堆焊焊条规范保护金属电弧焊 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
归类	合金钢
标签	镍基堆焊焊条
说明	Characteristics. Weld metal deposited by these electrodes contain a fairly large volume fraction of hypereutectic chromium carbides distributed throughout the microstructure. The alloy offers many of the same high-performance characteristics of deposits made using ECoCr-C or ENiCr-C electrodes in terms of abrasive wear resistance. The reduced nickel or cobalt content, or both, lowers corrosion properties and galling resistance. The high volume fraction of carbides makes this alloy sensitive to cracking during cooling. Applications. Welds made using ENiCrFeCo electrodes are preferred where high abrasion (low impact) is a major factor. Typical applications are feed screws, slurry pumps, and mixer components.

ENiCrFeCo 化学元素成分含量(%)

成分	Fe	C	Si	Mn	P	S	Cr	Ni	Mo	W	Co	其他合计
最小值	20	2.2	0.6	-	-	-	20	10	7	2	10	-
最大值	25	3	1.5	1	0.03	0.03	30	33	10	4	15	1

其他单个或其他合计化学成分包括表中未指定值的化学成分。只有在假定存在或在常规分析中，且有迹象表明其成分将超过规定值的情况下，才应进行分析。

注：本资料来源于互联网的公开资源整理，我们不保证这些资料的准确性、完整性和适用性。这些资料仅供您参考，不应用于任何商业用途或决策依据。本资料所记载的技术信息是说明产品的代表性特点和性能的参考值，对于因误用或不当使用本资料所记载的信息等而造成的损害恕难承担责任，敬请周知。

上一篇：Q245NHYJ
下一篇：F1554 Grade 55